PILIHU Bi-Metal Hole Saw HSS M42 Hole Cutter for Wood, Plastic, Drywall, Plasterboard and Soft Metal Sheet
1.Pipe Fast Cutting: The increased hardness of the carbide technology and optimized tooth geometry allow our hole saw to provide faster cutting speed and better cutting performance than standard hole saws for smooth cutting of ceiling tiles and drywall.
2.Easy Chip Removal: Newly designed chip removal groove, hole saw sets can discharge the chip rapidly, enhance the speed of removing the cylindrical iron filings in the hole and will not cause the crack and stuck piece phenomenon.
3.Cutting Design: The metal hole saw 65mm with the non-binding clean edge design, this hole saw cuts smooth and easy. And the spring on the drill bit would automatically push the disc out of the saw immediately after completing the hole.
4.Widely Used: The Bi-metal hole saw suitable for cutting Mild Steel, Stainless Steel, Cast Iron, Brass, Aluminium, Wood etc. Ideal for Installing Locks, Knobs in Doors and Cabinets or Drilling Larger Diameter Holes Through Desks etc. Carpentry decoration is an essential tool.
5.Satisfactory Service: Always committed to doing our best to make sure our customers are satisfied with the purchasing of holes seen from us. If you have any questions, please feel free to contact us to get an immediate reply.
){kind=link}
){kind=link}